ntpsec, a fork of the classic NTP distribution, supports an option to compensate for the 1024 week rollover: https://docs.ntpsec.org/latest/ntp_conf.html
time1 sec Specifies a constant to be added to the time offset produced by the driver, a fixed-point decimal number in seconds. Each "g" on the end of the constant adds the number of seconds in a 10-bit GPS era; each "G" adds the number of seconds in a 13-bit GPS era. On Sun, Jan 12, 2020 at 3:10 AM Björn <b...@lysator.liu.se> wrote: > Hi Skip, > > Are your NTP-server using the Palisade ref clock driver? > > http://doc.ntp.org/current-stable/drivers/driver29.html > > If it’s using the event-poll mode you might need a receiver supporting > that. I have not seen that outside the Palisade/Accutime family. > > Can you fudge the time1 all the way up to 1024wk (translated into seconds) > to compensate for the wnro with your current receiver? > > # Set packet delay > fudge 127.127.29.0 time1 0.020 > > - > > Björn > > Sent from my iPhone > > > On 12 Jan 2020, at 04:55, Skip Withrow <skip.with...@gmail.com> wrote: > > > > I have an NTP server that uses a Trimble GPS receiver (Accutime 2000, > > p/n - 39091-00, ROM 3.06) that has fallen prey to WNRO. Just > > wondering if there are any Trimble (or other brand) receivers that > > have TSIP serial comms that are available for a reasonable price? Any > > help appreciated. > > > > Skip Withrow > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@lists.febo.com > > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.