Brian, LH can do this. Issue the command "p" to bring up the PPS control menu.
On Thu, 16 Jan 2020 20:44:43 -0600, Brian Lloyd wrote: >After quite some time I dragged out my Tbolt and fired it up. Comes up >OK. Lady Heather is happy. 10MHz is spot on (after an hour or so). >Problem is, 1pps is missing. 1pps is enabled (or appears to be). >Suggestions? >I am running Trimble Visual Timing Studio 2.03.12. It seems to know >about the Thunderbolt-E but not the original thunderbolt. Not sure it >will do the right thing. Does anyone have an older copy of the program >for configuring the T-bolt? >Thanks in advance. >-- >n++ <https://www.lloyd.aero> >Brian Lloyd >706 Flightline >Spring Branch, TX 78070 >[email protected] <mailto://[email protected]> >+1.210.802.8359 >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to >http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >and follow the instructions there. Bill Beam NL7F _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
