Hi > On Jan 20, 2020, at 2:38 PM, jimlux <jim...@earthlink.net> wrote: > > On 1/20/20 10:01 AM, Mark Haun wrote: > >> A fair question... in fact I was initially planning to use the ABLNO + >> a PLL. The OCXOs I found, however, are CTS VFOV405's with phase noise >> claimed to be just as good as the ABLNO or CVHD VCXOs: >> https://www.ctscorp.com/wp-content/uploads/VFOV405.pdf >> They are reasonably low power, small[-ish], and have adequate stability >> for my needs. You can see why it is tempting to make the multiplier >> scheme work, as it should save on both power and board area. (The >> target application is a battery-powered SDR.) So far there don't seem >> to be any show-stopper issues with the plan, except that I am going to >> have to put together a phase-noise measurement system, or find a friend >> with one. > > Have you checked delivery times? - Just because it's listed in the catalog > does not mean you can get it in the next few weeks or months. If the online > sources (Digikey, mouser, Newark, etc.) have them in stock, then you're good > to go, but otherwise you could be looking at 6 months or more.
…. and maybe nasty stuff like minimum order quantities in the range of 10 or 20 pieces ( or prices below that which work out to the same thing). Bob > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.