Absolutely, but I’m hoping the XLi, like some of the later receivers, has a method to select the antenna voltage.
Steve > On Mar 27, 2020, at 8:06 PM, Dana Whitlow <[email protected]> wrote: > > You could easily do what you want without modifying the receiver, using a > 7805 or similar > regulator and a pair of bias tees, inserted in the transmission line from > the antenna. > > Dana > > >> On Fri, Mar 27, 2020 at 7:33 PM Steve - Home <[email protected]> wrote: >> >> I wondered if anyone has a user and/or service manual for the XLi SAASM? >> Or any of the option modules? The one I received appears to have had the L2 >> receiver removed. I’d also like to see if there’s a jumper or software >> setting to change the antenna supply voltage from 12v to 5v. >> >> Thanks for any assistance! >> >> Steve >> >> >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
