I just ordered some from Mouser in November, this is it:
https://www.mouser.com/ProductDetail/587-305-50-030
They list 41 in stock, for 1 to 9 the price is $8.43
Robert
On 04/08/2020 09:39 PM, Frank O'Donnell wrote:
I recently bought an HP10811A oscillator on eBay, only belatedly
realizing that it's designed to interface to a 15-contact connector
that the manual identifies as a CINCH 250-15-30-210 or equivalent.
A search turns up a vendor in Massachusetts called BMI Surplus Inc.,
that appears to have these in stock in new condition at a minimal
price. The only hitch is that BMI's website says they're closed down
due to COVID-19 and will not process any orders until their state
government authorizes businesses to return. (And at this point, it's
anyone's guess when that will be.)
To get going with the oscillator, it occurs to me that I could rig up
a few small alligator clips and use them on the required contacts for
the time being. Any other thoughts or suggestions on how to work this?
By any chance are there other known sources for the right size of
connector that might be operating right now?
Thanks much,
Frank O'Donnell
South Pasadena, California
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
