On Fri, Apr 24, 2020 at 7:20 PM Perry Sandeen via time-nuts < time-nuts@lists.febo.com> wrote:
> > But for us *Po Folks* hobbyist we have to stick with older but larger > parts. > Now if there was a service where you could order the part soldered to a > breakout board with .1 inch breakout pins for say, $20 then using many of > the latest chips would be feasible. But until then I believe 99.9 percent > of us have to find a commercial product or some other workaround. > Regards, > Perrier > > Proto Advantage will assemble parts onto any of their breakout boards. I have used them on a couple of occasions, most recently to get a few TDC7200s for a GPSDO project (more on that later) You order the breakout board and specify the Digi-Key part number, and a few days later your assembled breakout board arrives. https://www.proto-advantage.com/store/icsoldering.php -- --Jim Harman _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.