Mike, What model was the one you were able to adjust? Would it be possible to get a picture of the location of the resistor you changed and a value that worked for you?
73, Steve WB0DBS > On May 3, 2020, at 8:47 PM, "[email protected]" <[email protected]> wrote: > > Time-nutters-- > > I was successful at getting 2 small Mean Well 15 V switching supplies > adjusted down to 12 volts. On these particular models the output voltage > pot was in series with a resistor which limited the output adjustment range. > Swapping out the series resistor allowed trimming the output voltage down > to 12.0 V. > > However, a different model Mean Well switching supply had no resistor in > series with the adjustment pot and I was unable to figure out how to drop > the output voltage down to anything lower than 14.2 VDC. > > Mike Baker > WA4HFR > Micanopy, FL > ************* > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
