Hi A couple other options:
1) Adapt something like a 3540 series part 2) Redo the circuit to use a 10K. Bob > On May 12, 2020, at 7:16 AM, [email protected] wrote: > > > I made a mistake on the product nr. > > The correct value is 100k so the pn is 3700S-196-104 > > As Matthias suggest I have placed a samples request directly to Bourns. > > https://www.bourns.com/support/request-samples > > Luciano > > Luciano P. S. Paramithiotti > [email protected] > www.timeok.it > > Da "time-nuts" [email protected] > A [email protected] > Cc > Data Tue, 12 May 2020 11:25:56 +0200 > Oggetto Re: [time-nuts] Bourns for fine frequency tuning > > Am 12.05.20 um 11:03 schrieb [email protected]: >> Bourns 3700S-196-1004 > > A short search leads to > > < > > https://www.mouser.de/ProductDetail/Bourns/3700S-1-103?qs=Ce8Nk3DxA0Ci0Gcap53qHg== >> > > which says that that the base type is EOL-ed (end of product life). > > The data sheet has no 100K version. Also the type number is probably a typo. > > 1004 would mean 100 0000 which would be 1 Meg, practically impossible to > > do produce from NiCr wire or similar. > > > If all it has to do is selecting a voltage between 0 and some reference > voltage, > > 10K is probably just OK. > > regards, > > Gerhard > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
