I like the look of the 4.1 especially once they sell the Ethernet kit. I'll port my NTP/PTP server over to it as it is a lot smaller (and cheaper) than the current board that I'm using. Happily the Teensy is supported by ChibiOS which is the OS that I used before.....
Philip On Thu, May 14, 2020 at 7:35 PM Didier Juges <[email protected]> wrote: > I just got a Teensy 4.0, OSHPark edition (it was $18 when I bought a set of > boards a couple of weeks ago). > I have not done anything with it yet but I am looking forward to. > I have not looked at the differences with the 4.1. > > Didier KO4BB > > On Thu, May 14, 2020, 5:15 PM Adrian Godwin <[email protected]> wrote: > > > I just saw an update to the Teensy microcontroller line. > > Teensys are somewhat like an arduino but generally with faster processors > > and more memory. > > > > The latest one, 4.1, has an ethernet interface with IEEE1588 > > packet timestamping. > > > > https://www.pjrc.com/category/news/ > > > > I'm not on pjrc's staff etc, but I like his products and as far as I know > > this is a 'first' for such an interface on a cheap, fast development > board > > ($26, 600MHz). > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
