I believe Wenzel makes custom parts for various customers and won't divulge any info unless you are that customer. I did email them and they were willing to provide me a datasheet of a similar standard part. You could try asking that. I have a 500-16423A and they sent a datasheet for a 501-14057 that it was similar to. Does the one you have look like a standard part they have? In my case the reference input frequency to lock to was different from the standard. I just swept the input frequency slowly till it locked and figured out what it was.
73, Mark W7MLG On Sun, May 24, 2020 at 10:15 PM Dave Miller <ve...@ve7hr.ca> wrote: > I did a bit of Googling and have come up with nothing so I joined up to > this list and will ask a few questions. > > Looking for a data sheet for Vectron Model 207-5916. I know it's 10MHz. It > seems to produce an output powered by 12V and I expect the white wire is > for the wiper of the frequency adjusting pot. > That was just a WAG based on the colours of the wires on the connector. > > Second one is a Wenzel 500-0481. If I recall, I called Wenzel a while ago > and they would not give me a pinout as it was a proprietary parts number. > > Is there a standard on the- multi pin connector. It's marked 12V 10Mhz. > They also wanted me to send them in for calibration as they said it was so > old they were curious to see what frequency it was. It's a virgin with > no wire ever soldered to it so I can't guess the wiring. > I did not send it in as the shipping and calibration charges were > significant. > > While I wait for my 5372A I have the Vectron warming up connected to > Timelabs with a talk only HP counter. > > Thanks > Dave > > > -- > 72 de Dave > VE7HR > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.