On 5/31/20 8:14 PM, Charles Steinmetz wrote:
Doing as you are now -- feeding the T2-Mini output through coax to the input of your scope -- you will either need to switch the scope input impedance from 1 Mohm to 50 ohms (if the scope has that feature -- sadly, many digiscopes do not), or use a 50 ohm feedthrough terminator on the scope input.
Thanks for the comments. Attached is a screen shot with the Thunderbolt's 10 MHz output again going through the T2-Mini to the scope, but with a 50-ohm feed-through terminator placed on the scope's input.
Frank
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
