What, the names aren't self-explanatory? :-) TADD-1 -- broadband (0.1 - >30 MHz) analog distribution amplifier TADD-2 -- 5/10 MHz 6 channel divider (1k to 1 PPS) TADD-2 Mini -- 1/2.5/5/10 MHz to PPS single channel divider; very tiny TADD-3 -- 6 channel PPS distribution amplifier (no divider)
PulsePuppy is an oscillator carrier with divider and, assuming it's fitted with 10 MHz oscillator, can provide a jumper-selected 10 MHz, 100 PPS, 10 PPS, or 1 PPS output. All the dividers use versions of TVB's PicDIV code. John ---- On 6/2/20 1:39 PM, jimlux wrote: > > I'm trying to distinguish among all these options.. > > TADD-2 and TADD-3 are 5/10 in, multi out - 3 is just a new 2? > TADD-2 mini is 1,2.5,5,10 in and one out > PP has a way to solder a packaged oscillator on the board, lower power, > and puts out 1, 10, and 100pps. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
