On Wed, 17 Jun 2020 at 13:45, Tom Van Baak <[email protected]> wrote:
> Hi Dave, > There's not an easily accessible "reset to factory defaults" button > on the receiver like there is on many devices. > > Pull the AC or DC power cord. I'm curious why you ask. What state is > your 58503A that you have to resort to this? > > /tvb Thank you Tom. I had assumed that the serial port settings would be preserved in the event of a power failure. As I reported a week or two ago, Lady Heather will not communicate well with the receiver. I wondered if there was any point in trying a faster serial port speed. Lady Heather gets the time from the GPS receiver once, but then either 1) Windows reports the program is not responding. 2) The clock runs backwards. I thought it might be worth trying different serial port settings. -- Dr. David Kirkby, Kirkby Microwave Ltd, [email protected] https://www.kirkbymicrowave.co.uk/ Telephone 01621-680100./ +44 1621 680100 Registered in England & Wales, company number 08914892. Registered office: Stokes Hall Lodge, Burnham Rd, Althorne, Chelmsford, Essex, CM3 6DT, United Kingdom _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
