Hi.

Firstly, I don't "know" the device you've got, but it may only be possible to 
intercept the timecode and correct it there "on the fly".

Unless, you can update the firmware on the FEI device, if such is available.  
(You could contact FEI-Zyfer and ask?)

It may be easier just replace it with a Pi, or other PC hardware (anything from 
a Pentium-1 class box or later) running a bare bones FreeBSD with a generic GPS 
RX that can also supply a PPS signal, and have that work as your local NTP time 
source, internally correcting for the roll-over(s) (if the GPS can't handle it 
itself.)

It can also be configured to use external (if access is available) NTP time 
sources in the event your local GPS RX dies, someone covers it up, is killed & 
eaten by a passing dragon or whatever.

Lots of info here ( http://satsignal.eu/ntp/Raspberry-Pi-NTP.html ) for 
example...   No affiliation.

Or, replace it with a Nanosync 4  ( http://www.fei-zyfer.com/time_sync.htm )  
If those later devices do the right thing, & funds are available etc etc.

Or, a LeoNTP device.  ( 
https://store.uputronics.com/index.php?route=product/product&product_id=92 )  
Again, no affiliation, but I hear they are good.

Regards.

Dave G8KBV.



From: Eric Scace <e...@scace.org>
To: Time Nuts email list <time-nuts@lists.febo.com>
Subject: [time-nuts] FEI Nanosync 2
Message-ID: <8c9bbbec-197d-4766-bd71-8a41b85cb...@scace.org>
Content-Type: text/plain;       charset=utf-8

Hi ?

   In a parallel life I work as a broadcast radio engineer. An AM transmitter's 
hybrid digital control system contains an embedded FEI Nanosync 2 GPS receiver. 
The GPS time data appears to suffer from a week 1024 rollover problem, causing 
the control system to believe (and broadcast) a date around 2000 November (if I 
remember correctly).

   I can get access to the serial port to the FEI Nanosync 2 card. Does anyone 
have experience or suggestions as to how to force this receiver to the proper 
date?

   Thanks for any help.

? Eric

p.s.: I apologize if the information requested below is in the archives 
somewhere. Is there an alternative search other than month-by-month?



-- 
Created on and sent from a Unix like PC running and using free and open source 
software:


_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to 
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.

Reply via email to