Thanks Hal I could try and get a wire onto the GPIO, with a lot of work...
Andrew -----Original Message----- From: time-nuts <time-nuts-boun...@lists.febo.com> On Behalf Of Hal Murray Sent: 03 July 2020 18:45 To: Discussion of precise time and frequency measurement <time-nuts@lists.febo.com> Cc: hmur...@megapathdsl.net Subject: Re: [time-nuts] Raspberry Pi NTP server andrew.hanc...@cyrus-consultants.co.uk said: > So I cannot use HaTs anymore, so I cobbled together a GPS ublox6 (same > module) but using a FT232RL, and connected all the pins correctly, and > DCD so I can get PPS. FT232R is a USB chip. Timing over USB is "interesting". Do you know about hanging bridges? Can you get a wire in to the GPIO pin the HAT used? That would be an interesting experiment. There may be a parameter you can tweak, but I can't think of the name right now. -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
