Hi Jim; These are encapsulated blocks two 48>5 and one 48>24 - I know the 24 is made by Victor. Pretty easy to replace. I up-dated my 2110 with a high contrast LED backlite display. Easy to do when you have it apart. Cheers;
Tom Knox SR Test and Measurement Engineer Ascent Concepts and Technology 4475 Whitney Place Boulder Colorado 80305 303-554-0307 [email protected] "Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein ________________________________ From: time-nuts <[email protected]> on behalf of Tom Van Baak <[email protected]> Sent: Sunday, July 5, 2020 3:33 PM To: [email protected] <[email protected]> Subject: Re: [time-nuts] Austron 2110 schematics? Jim, For the power supply see: http://leapsecond.com/museum/au2110b/ps.htm Let me know if you need more pages from the manual. For sample LCD readings see: http://leapsecond.com/museum/au2110b/lcd.htm /tvb On 7/5/2020 1:34 PM, AC0XU (Jim) wrote: > Time Nuts- > > I have an Austron 2110 with a severely toasted power controller board. > Probably not repairable. I plan to build a substitute with a more modern > design. > > Does anyway have schematics? I noticed correspondence between Magnus > Danielson and Harald Hauglin some years ago. Did the manula or schematics > ever get posted? > > Thanks in advance- > Jim > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
