Hi Alex; I have never seen one with a DB15, but perhaps I have not been paying attention. So if my memory is correct these have one male DB9 power input connector and three female DB9 connectors. What information are you looking for? I assume one of the female DB9 is a standard RS232. I have the test cable and can check which pins to apply power. I also have the original wiring harness and can send a photo of that. Feel free to contact me directly. Cheers;
Tom Knox [email protected] "Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein ________________________________ From: time-nuts <[email protected]> on behalf of Alexander Huemer <[email protected]> Sent: Tuesday, July 14, 2020 9:57 AM To: time-nuts mailinglist <[email protected]> Subject: [time-nuts] Pinout of 'Interface' connection of Lucent RFTGm-II-Rb and RFTGm-II-XO Hi I own a pair of Lucent RFTGm-II-Rb and RFTGm-II-XO. I also have the pair RFTG-u REF 0 and RFTG-u REF 1. Interestingly enough the interconnection between these pairs is different. The latter uses a D-sub 15 connector like VGA, though the former uses D-sub 9 connectors. I searched the web for the pinout of the former with no success. Any pointers would be greatly appreciated. -Alex OE2AHL _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
