Hello Time-Nuts, OK, have one for the old timers out there. Does anyone have pinout or voltage input information on a Brightline oscillator? This company was founded by Charles S. Stone in Cedar Park, TX. His company was soon purchased by Frequency Electronics and he went to work for them.
The oscillators in question (I have a 10MHz and a 100MHz) are 1980's vintage and the base looks exactly the same on both of them. There is a 9-pin (tube socket) connector, plus two SMA connectors (I believe one is output and the other EFC). There are red and black wires connected to the units so I think I know the basic Gnd and Supply pins. However, I don't know the supply voltage, or what any of the other pins might be used for. As always, all help appreciated. Thanks in advance. Skip Withrow _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
