Pat I am familiar with the fts4050. Please send me a pix of what you are looking at. Best to do this offline. Thanks Paul.
On Fri, Sep 25, 2020 at 10:46 PM Patrick Tanner <[email protected]> wrote: > Hi folks. > > I'm new to the board, my name is Patrick. I'm a career RF/systems engineer. > Greetings all around! > > I just made a couple of 'good' handyman special buys on the worlds largest > auction. I got a PRS10 that needed a new SA612A mixer that I got working, > so, happy about that. Thanks to KO4BB for having the schematics. > > I also picked up a FTS4040A, apparently with a failed PSU. Its labelled > 'high voltage' , but the dinky 24? 26? Ga output leads (red/black 3x > ganged) don't led me to believe that there' s 2.2kV here. Can any one shed > some light on what this PSUs output is? I'm hoping that I can either fix or > replace it and find a diamond here. > > Thanks for your help. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
