The 106D DMTD unit was designed by NBS (now NIST), and the BNC connectors I mentioned were also isolated from the chassis. The shield side was bypassed to the chassis ground inside via a 50 Ohm resistor and a .1uf capacitor. I retained those when I converted to isolated SMA. The center pin and shield were then sent via coax to the various points.
Cheers, Corby _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
