A lot of older HP kit, shares many of the same commands and queries etc
between remote control methods. Though the GPIB specific stuff,
manipulating GPIB (or should that be HPIB) interrupt registers etc, is
probably not included in the serial I/O protocol!
Worth a look and a try if nothing else.
73.
Dave B
On 09/02/2021 17:00, [email protected] wrote:
Subject: Re: [time-nuts] VFD Idea for HP Equipment
Message-ID:
<CABFqLQAx2Jv5Q=wc9gZGh8j9XLAJy=bmfrsajrurt6xvsef...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
True if you're using them in a GPIB setup. In my case I'm configuring via
front panel and collecting data through the RS232 interface so it's more
convenient to have local control rather than sending a GPIB command.
--
Created on and sent from a Unix like PC running and using free and open source
software:
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
