Hi What we’re talking about is the easiest way to set up a crystal line that people can come and “play” on. The idea being that a setup with $10M of finishing gear probably is out of bounds in this case ….
Bob > On Feb 20, 2021, at 4:08 PM, JEROME SODUS <[email protected]> wrote: > > Hello, > > Several days ago, someone posted "Next up drop it in a solder seal base and > solder it into an enclosure." as a part of his response. > I thought, "OMG....suggesting to use a solder-seal-base is a recipe for > ageing." > Instead, resistance-weld or, even better yet, cold-weld should be used. > > Also, perhaps I missed it, but I did not see any mention of needing a clean > room in which to finish the blanks. > I recall seeing, at the facility where I worked, tens of women smoking while > finishing crystals to frequency; that practice ended in the early 70s. > > 73 jerry km3k > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
