Hi Since this is a part that Ovenaire made for HP, probably the best way to work out what’s what is to find the equipment that it went into. Best guess is that would be an item that shows up in the 1985 ~ 2005 HP catalogs.
( = OSC92 is an Ovenaire part number that was carried on after McCoy folded Ovenaire into the “empire”). That makes it a > 25 year old spec. Rough guess at the specs: 5x10^-8 over 0 to 70C -150 dbc/Hz at 10 KHz offset 10 dbm +/- 3 db 10W power at turn on. With the fine adjust it may or may not have an EFC. There are enough pins for it to have one. Pinout looking at it with the SMA “up” and numbering from left to right: 1) V- / return / ground 2) Case 3) B+ 4) ??? 5) ??? 6) ground Bob > On Apr 13, 2021, at 3:17 PM, Juerg Koegel <j.koeg...@gmail.com> wrote: > > I am looking for data (PinOut, Power, Stability, Phase Noise, EFC ) for the > 10MHz OCXO McCoy Electronics OSC92-51B. > Thanks for all information. > > Juerg > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an > email to time-nuts-le...@lists.febo.com > To unsubscribe, go to and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.