I have had a KS-24019 (L108-L109) pair running continuously for several years. Now have a red LED Fault on the XO unit and the RB unit shows green LED On-Line status. The NO-GPS LEDs are off on both the -XO and -RB units but if I disconnect the antenna - they do show Yellow NO_GPS status. Got out my old XP laptop and ran the Lucent software. The Rb (REF 0) is active and locked to GPS and working fine. The XO says Unit Failed but the message code for the first 4 hex nibbles which should show alarm status are all zero bits so no failure code is evident. The last 2 alarm nibbles are 53 representing the # of hours since failure. The GPS time is correct on the Rb but is fixed on the XO at 80-01-06 00:00:00. The XO checksum shows PASS. Based on this the XO GPS is working, locked and sending correct GPS messages to Rb. The XO CPU seems to be working as well so am I correct this seems to be a Osc failure? Besides checking voltages (which I'm not sure what they should be) - any advice how to go about further testing sand repair? Thanks in advance Jerry NY2KW
-- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ time-nuts mailing list -- [email protected] -- To unsubscribe send an email to [email protected] To unsubscribe, go to and follow the instructions there.
