On Thu, 2021-11-11 at 14:07 +0000, Andy Talbot wrote: > I made a 5MHz doubler plus distribution for my HP5061. You can see > the > design at http://g4jnt.com/10MHzDist.pdf The doubler is a full wave
It's worth noting that the HP5370A has a doubler on the reference input. It will accept either 5 or 10 MHz, and in the case of 5 MHz, it doubles. It may not be as clean as what you need, but the full schematic is in the service manual. There is a reasonable chance that I could measure mine and see if it comes close. Bear in mind that it converts to a square wave in order to drive the counter, but also back to a sine wave for the reference output. Have fun, Darren _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.