I've used, wait for it, beeswax as a potting compound. Gouda cheese comes coated with it (some has paraffin, get the best,) in a lovely red. I also found out some years ago that Catholic churches use pure beeswax for large (not votive) candles and may give you the stubs. Nice, clean white. Or, dear ol' Amazon has a huge assortment for around $1.00 / oz, in various stages of "purification". For expensive beeswax with some unknown sticky additives, use toilet mounting rings... (good also for preserving dry milsurp gunstocks, according to Anvil.)
73, Don

On 2021-11-11 15:00, Gregory Beat via time-nuts wrote:
Rick -

Look at 3M Scotch-Weld Epoxy Potting Compound DP270.
https://www.3m.com/3M/en_US/p/d/b40066438/
I purchase from McMaster-Carr (Midwest pickup window is 2 miles from house).

This is what I have used, since it is rated for -65° to 350° F and
safe with copper (potting electronics, transformers, etc.)

***
Date: Wed, 10 Nov 2021 14:40:53 -0800
From: "Richard (Rick) Karlquist" <rich...@karlquist.com>
Subject: [time-nuts] Potting compound advice needed
To: time and frequency measurement <time-nuts@lists.febo.com>T
I am looking for help choosing a potting compound that
has the following properties:

1.  Good for 5,000VAC @ 1 MHz
2.  Low RF losses.
3.  Low permittivity is preferred
4.  Low tempco of permittivity is a want.
5.  Something I can implement in my home shop without access to a
vacuum pump etc. is a want.

Thanks in advance

Rick Karlquist N6RK
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe
send an email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.

------------
The whole world is a straight man.
----------------------
Dr. Don Latham  AJ7LL
PO Box 404, Frenchtown, MT, 59834
VOX: 406-626-4304
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an 
email to time-nuts-le...@lists.febo.com
To unsubscribe, go to and follow the instructions there.

Reply via email to