Hi In this case it’s not thermal. I’ve tested a ton of parts in the same environment ( maybe not 2,000 pounds but several hundred OCXO’s ).
The PRS-10 gives you that hump at 2 seconds no matter what you do. It’s part of the basic design of the unit …. Bob > On Nov 17, 2021, at 10:16 AM, Matt Huszagh <huszaghm...@gmail.com> wrote: > > Bob kb8tq <kb...@n1k.org> writes: > >> I have a 740 as do others on the list. The big gotcha is the OCXO in the >> device. >> It has various quirks that limit the performance of the device. The ADEV >> plot they >> show for the OCXO is a “sometimes / maybe / might” sort of thing. One of the >> “get to it eventually” projects here is to see if it can be replaced with >> something >> that has better ADEV performance. > > Good to know. Have you tried disciplining the PRS-10 in one of these > units? Based on Dana's comments, it sounds like this may not exhibit the > same ADEV susceptibility to the thermal environment. > > Matt _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-le...@lists.febo.com To unsubscribe, go to and follow the instructions there.
