TVB, I'm interested in the nitty-gritty of this problem and would appreciate it if you OK this thread's being kept on the group.
Dana On Thu, Nov 18, 2021 at 6:58 PM Jared Cabot via time-nuts < [email protected]> wrote: > Hi, > Your help is appreciated. We can keep this on-list for now I guess, on the > chance it helps someone in the future. > > Jared. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Friday, November 19th, 2021 at 08:25, paul swed <[email protected]> > wrote: > > > Jared I would be happy to see if I can help remotely. We may want to > take this offline or not. Others may find it interesting. > > Regards > > Paul > > WB8TSL > > > > > On Thu, Nov 18, 2021 at 12:56 PM Jared Cabot via time-nuts < > [email protected]> wrote: > > > > > > Hi all, > > > > > > > I have a 5065A Rubidium Standard that was working ok, but has lost the > 2nd harmonic. > > > My voltages are all ok, the physics package hasn't overheated and I > have replaced the usual resistors on the lamp assembly (and it was running > fine afterward for a while), the lamp illuminates, and I've done the > procedure to remove cell flooding. > > > All readings on the 'circuit check' switch are nominal, apart from the > 2nd harmonic position. No matter what I do, I can no longer get it to raise > above 0. > > > However, when I first turn the unit on, the needle drops to 0 and > flicks a little before settling on 0 and staying there. > > > > > > > Can someone help me get this unit up and running again? > > > > > > > Thanks! > > > Jared_______________________________________________ > > > time-nuts mailing list -- [email protected] -- To unsubscribe > send an email to [email protected] > > > To unsubscribe, go to and follow the instructions > there._______________________________________________ > time-nuts mailing list -- [email protected] -- To unsubscribe send > an email to [email protected] > To unsubscribe, go to and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] -- To unsubscribe send an email to [email protected] To unsubscribe, go to and follow the instructions there.
