Hi, The electrical tune (fine control knob) is set to midrange now, at the 250 setting. The mechanical tune (the one in the OCXO itself) is maxed to its limit and I can't raise it further.
My 5335A has the OCXO option, so if it is compatible, I might be able to do a swicharoo into the 5065A to see if it comes alive, that will tell me for sure that the 5065A OCXO is being naughty. Thanks! Jared ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Sunday, November 28th, 2021 at 12:09, Bob kb8tq <[email protected]> wrote: > Hi > > Just to double check. > > There is an electrical tune (controlled by the multi turn pot) and a > > mechanical adjust on the OCXO. The “that needs repair” judgement > > is based on both being adjusted to their “max high” setting and you > > still being ~40 Hz low. > > I doubt that you have 40Hz of range between the two adjustments so > > it is unlikely that you have a “one set wrong” sort of problem. > > Bob > > time-nuts mailing list -- [email protected] -- To unsubscribe send an > email to [email protected] > > To unsubscribe, go to and follow the instructions there.
signature.asc
Description: OpenPGP digital signature
_______________________________________________ time-nuts mailing list -- [email protected] -- To unsubscribe send an email to [email protected] To unsubscribe, go to and follow the instructions there.
