Hi,
I'm trying to synchronise some Win2000 boxes on our network for a temporary period but I'm having problems.
Steps:
1) Stop W32Time: ' net stop w32time '
2) Setup SNTP server (router on network): ' net time /setsntp:10.40.19.2 '
3) run ' w32tm -once '
I ran this on 2 servers but one went out by approximately 7secs. They were previously out by no more than a couple of seconds.
Below is the output from the command from both boxes. When comparing, there seems to be an additional line at the start of the output from server 1: ' W32Time: 156248 Adj!=Incr 156250 '
Server 1:
W32Time: BEGIN:InitAdjIncr
W32Time: Adj 156248 , Incr 156250 fAdjust 0
W32Time: 156248 Adj!=Incr 156250
W32Time: END:Line 2481
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1385
W32Time: TimeMMInit()
W32Time: Kernel timer : using default maximum resolution
W32Time: MaximumTime = 156250
W32Time: CurrentTime = 156250
W32Time: Timer calibrated, looped 1 times
W32Time: BEGIN:InitTmCfg
W32Time: END:Line 802
W32Time: BEGIN:InitTmCli
W32Time: END:Line 2574
W32Time: BEGIN:InitTmData
W32Time: END:Line 2596
W32Time: AvoidTimeSyncOnWan 0
W32Time: ntpserver - 10.40.19.2
W32Time: BEGIN:CMOSSynchSet
W32Time: Setting adjustment 156248 - Bool 0
W32Time: BEGIN:SetTSTimeRes
W32Time: END:Line 1273
W32Time: END:Line 842
W32Time: BEGIN:InitializeDC
W32Time: BEGIN:GetRole
W32Time: Role is 'workstation'
W32Time: END Line 672
W32Time: END:Line 704
W32Time: timeBeginPeriod: setting resolution 9
W32Time: BEGIN:TimeSync
W32Time: BEGIN:FGetType
W32Time: END Line 253
W32Time: BEGIN:FDoTimeNTPType
W32Time: BEGIN:ChooseNTPServer
W32Time: END Line 2156
W32Time: BEGIN:GetSocketForSynch
W32Time: NTP: ntpptrs[0] - 10.40.19.2
W32Time: Port Pinging to - 123
W32Time: Connecting to "10.40.19.2" (10.40.19.2)
W32Time: END:Line 1148
W32Time: BEGIN:GetDefaultRid
W32Time: END Line 2337
W32Time: BEGIN:ComputeDelay
W32Time: BEGIN:NTPTry -- init
W32Time: END Line 1661
W32Time: BEGIN:NTPTry -- try
W32Time: BEGIN:ComputeInterval
W32Time: END Line 2457
W32Time: Sending to server 48 bytes...
W32Time: Recv'ed from server 48 Bytes...
W32Time: END Line 1863
W32Time: BEGIN:NTPTry -- delay
W32Time: END Line 1990
W32Time: Round trip was 16ms
W32Time: BEGIN:NTPTry -- gettime
W32Time: BEGIN:Fgmtimetonttime
W32Time: END Line 2541
W32Time: END Line 1976
W32Time: one-way delay is 8ms
W32Time: END Line 1623
W32Time: END Line 367
W32Time: BEGIN:TimeDiff
W32Time: ClockError -0
W32Time: END Line 2520
W32Time: BEGIN:FCheckTimeSanity
W32Time: END Line 548
W32Time: BEGIN:SetTimeNow
W32Time: END Line 1258
W32Time: Time was 01min 39.810s
W32Time: Time is 01min 39.810s
W32Time: Error 0ms
W32Time: BEGIN:CheckLeapFlag
W32Time: END:Line 584
W32Time: BEGIN:ComputePostTimeData
W32Time: BEGIN:ComputeInterval
W32Time: END Line 2457
W32Time: BEGIN:ComputeSleepStuff
W32Time: Computed stagger is 0ms, bias is 0ms
W32Time: Time until next sync - 2699.960s
W32Time: END:Line 794
W32Time: END:Line 220
W32Time: END:Line 195
W32Time: BEGIN:TermTime
W32Time: TimeMMCleanup()
W32Time: BEGIN:FinishCleanup
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1385
W32Time: Time service stopped.
W32Time: END:Line 407
Server 2:
W32Time: BEGIN:InitAdjIncr
W32Time: Adj 156250 , Incr 156250 fAdjust 0
W32Time: END:Line 2481
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1385
W32Time: TimeMMInit()
W32Time: Kernel timer : using default maximum resolution
W32Time: MaximumTime = 156250
W32Time: CurrentTime = 156250
W32Time: Timer calibrated, looped 1 times
W32Time: BEGIN:InitTmCfg
W32Time: END:Line 802
W32Time: BEGIN:InitTmCli
W32Time: END:Line 2574
W32Time: BEGIN:InitTmData
W32Time: END:Line 2596
W32Time: AvoidTimeSyncOnWan 0
W32Time: ntpserver - 10.40.19.2
W32Time: BEGIN:CMOSSynchSet
W32Time: Setting adjustment 156250 - Bool 0
W32Time: BEGIN:SetTSTimeRes
W32Time: END:Line 1273
W32Time: END:Line 842
W32Time: BEGIN:InitializeDC
W32Time: BEGIN:GetRole
W32Time: Role is 'workstation'
W32Time: END Line 672
W32Time: END:Line 704
W32Time: timeBeginPeriod: setting resolution 9
W32Time: BEGIN:TimeSync
W32Time: BEGIN:FGetType
W32Time: END Line 253
W32Time: BEGIN:FDoTimeNTPType
W32Time: BEGIN:ChooseNTPServer
W32Time: END Line 2156
W32Time: BEGIN:GetSocketForSynch
W32Time: NTP: ntpptrs[0] - 10.40.19.2
W32Time: Port Pinging to - 123
W32Time: Connecting to "10.40.19.2" (10.40.19.2)
W32Time: END:Line 1148
W32Time: BEGIN:GetDefaultRid
W32Time: END Line 2337
W32Time: BEGIN:ComputeDelay
W32Time: BEGIN:NTPTry -- init
W32Time: END Line 1661
W32Time: BEGIN:NTPTry -- try
W32Time: BEGIN:ComputeInterval
W32Time: END Line 2457
W32Time: Sending to server 48 bytes...
W32Time: Recv'ed from server 48 Bytes...
W32Time: END Line 1863
W32Time: BEGIN:NTPTry -- delay
W32Time: END Line 1990
W32Time: Round trip was 15ms
W32Time: BEGIN:NTPTry -- gettime
W32Time: BEGIN:Fgmtimetonttime
W32Time: END Line 2541
W32Time: END Line 1976
W32Time: one-way delay is 7ms
W32Time: END Line 1623
W32Time: END Line 367
W32Time: BEGIN:TimeDiff
W32Time: ClockError -7754
W32Time: END Line 2520
W32Time: BEGIN:FCheckTimeSanity
W32Time: END Line 548
W32Time: BEGIN:SetTimeNow
W32Time: Skewing for backwards, badj, btime = 78125 15508
W32Time: END Line 1258
W32Time: Time was 00min 13.876s
W32Time: Time is 00min 06.122s
W32Time: Error 7754ms
W32Time: BEGIN:CheckLeapFlag
W32Time: END:Line 584
W32Time: BEGIN:ComputePostTimeData
W32Time: BEGIN:ComputeInterval
W32Time: END Line 2457
W32Time: BEGIN:ComputeSleepStuff
W32Time: Computed stagger is 0ms, bias is 0ms
W32Time: Time until next sync - 2699.960s
W32Time: END:Line 794
W32Time: END:Line 220
W32Time: END:Line 195
W32Time: BEGIN:TermTime
W32Time: TimeMMCleanup()
W32Time: BEGIN:FinishCleanup
W32Time: BEGIN:TsUpTheThread
W32Time: END Line 1385
W32Time: Time service stopped.
W32Time: END:Line 407
I would appreciate any assistance with this.
Thanks in advance,
Tony
***************************************************************
The information contained in this e-mail and any files transmitted
with it is confidential and may be subject to legal professional
privilege. It is intended solely for the use of the addressee(s).
If you are not the intended recipient of this e-mail, please note
that any review, dissemination, disclosure, alteration, printing,
copying or transmission of this e-mail and/or any file transmitted
with it, is prohibited and may be unlawful.
If you have received this e-mail by mistake, please promptly
inform the sender by reply e-mail and delete the material.
Whilst this e-mail message has been swept for the presence of
computer viruses, eircom does not, except as required by law,
represent, warrant and/or guarantee that the integrity
of this communication has been maintained nor that
the communication is free of errors, viruses, interception or
interference.
***************************************************************
_______________________________________________ timekeepers mailing list [email protected] https://fortytwo.ch/mailman/cgi-bin/listinfo/timekeepers
