On Mon, Sep 15, 2008 at 12:44:26PM -0400, Hanxi Zhang wrote: > After being able to build tinc from source on FC8, I have stumbled upon > some configuration issue. My tinc daemon is configured as follows: [...] > Finally, there is a tinc-up script under /etc/tinc/crc_idb1/: > > #!/bin/sh > ifconfig crc_idb1 10.1.8.100 netmask 255.255.255.0 up > route add -net 10.1.0.0/16 crc_idb1 > > The problem is, when I start tincd, I get this warning: > > tincd -n crc_idb1 --pidfile=/tmp/tinc.crc_idb1.pid -d5 -D > /dev/net/tun is a Linux tun/tap device (tun mode) > Listening on :: port 655 > Can't bind to 0.0.0.0 port 655/tcp: Address already in use > Ready > > And if I do "ifconfig", the crc_idb1 virtual interface is always > inactive/down, even if the tincd daemon is running.
You mention that your config files are in /usr/local/etc/tinc/crc_idb1, but
that the tinc-up script is in /etc/tinc/crc_idb1. They should all be in the
same directory. Also make sure that the tinc-up script is executable.
> Am I doing something obviously wrong or it somehow has
> to do with the Can't bind warning?
The bind warning has nothing to do with it, you can ignore it.
--
Met vriendelijke groet / with kind regards,
Guus Sliepen <[EMAIL PROTECTED]>
signature.asc
Description: Digital signature
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
