Can you give some more detail about the specifics of the network? Such as the subnetting? Is the Tinc interface on A bridged?
On Mon, Feb 16, 2009 at 10:23 PM, Christian Lyra <[email protected]> wrote: > Hi there, > > I´m trying to use tinc to solve this scenario: > > Host A has public/know ip address > Hosts B and C are behind nat > > I´m using switch mode, and hosts B and C has IndirectMode enabled. > Host A is in listen only mode (no ConnectTo set), hosts B and C > connects to A. Everything works almost as expected... B and C > connects to A, and they can ping each other, but ONLY after each other > learns the other MAC thru A. What I mean is: if I start A, B, C, and > try to ping C from B, ping will fail, but if I send a ping to A from > C, then B will be able to ping C as it will learn the MAC of C thru A. > If there´s no traffic between the hosts for a while, then the arp > entries will expire from arp tables and the problem will happen again. > > Is there a way to solve this with a tinc configuration? leaving a cron > job to make nated hosts ping A is not a elegant option :-( > > -- > Christian Lyra > PoP-PR/RNP > _______________________________________________ > tinc mailing list > [email protected] > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
