-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi,
I'm using tinc to connect a couple of ipv6 capable machines using a mix of upd6, udp4, tcp6 and tcp4. Now I wanted to add an linux embedded device, which has no ipv6 support at all. Tinc did compile and configuration is fine (tested on other machine), but after connecting the embedded device to other hosts tinc instances, it suddenly crashes. The last things happening before crash are. GOT ADD_EDGE GOT ADD_SUBNET Node A (123.123.123.123 port 655) became reachable Node B ((null)) became reachable Error while translating addresses: ai_family not supported Got unexpected signal 8 (Floating point exception) The difference between the ConnectTo A and B is that A is a reverse lookupable dns and B's reverse lookup does not match its original dns name in Address = ... statement (as it is a dynamic dialin host). I've configured tinc to be in Mode=Switch and put all public keys of all nodes on all hosts. It is not difficult to trace the error back to netutl.c line 94 (sockaddr2str, tinc 1.0.10) but I ask myself whether it is intended to stop tinc from working if just some hosts in the network are connected by ipv6? Or is there some way to circumvent this problem? Thanks Michael -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkrnQ94ACgkQ+6sI4XSM4u1BvQCeJaGzVQGxuowHpLZNmC5iNOro tSgAnR5BupXC+d/M7gN7HdcMGoXIMIhd =VvJV -----END PGP SIGNATURE----- _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
