Hi, I've followed the guide at:
http://blogs.operationaldynamics.com/andrew/software/research/using-tinc-vpn and have a working tinc VPN. Here's my topology: - CentralNode has a fixed public IP address that everyone connects to - Leaf1 and Leaf2 may have different IP addresses depending on where they are, and usually those will be behind NAT (think, two laptops going around and you get the idea). I setup Leaf1 and Leaf2 to connect to CentralNode and they both do and everyone can talk to everyone. However, when both Leaf's are behind the same NAT it would be nice if they were able to figure that out and not have to go through CentralNode for everything. Since the IP addresses are always changing I can't configure an Address option. Is tinc able to just try and use whatever is the current IP address of the two hosts and see if it can communicate? If they're behind the same NAT it would work and if not it would just continue to go back and forth to CentralNode. In that situation it would ideally use something like STUN so it could do away with the central node even when both hosts are behind two different NATs. Is anything like this currently possible or planned? Cheers, Pedro _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
