OK makes sense.
How often would you expect to see the REQ_KEY and the PMTU probes
occurring?
They seem to happen quite a lot, is that normal?
Tom
On 2013-11-28 15:51, Guus Sliepen wrote:
On Thu, Nov 28, 2013 at 02:52:45PM +0000, [email protected] wrote:
Now that debugging is turned on properly, I am seeing some
interesting lines:
2013-11-28 14:48:48 tinc.dcvpn[31620]: Got type 2 MTU probe reply
1431 from rps (2001:1b40:5000:9::2 port 655)
2013-11-28 14:48:48 tinc.dcvpn[31620]: Got type 2 MTU probe reply
1431 from rps (2001:1b40:5000:9::2 port 655)
2013-11-28 14:48:48 tinc.dcvpn[31620]: Got type 2 MTU probe reply
1431 from rps (2001:1b40:5000:9::2 port 655)
2013-11-28 14:48:48 tinc.dcvpn[31620]: rps (2001:1b40:5000:9::2 port
655) RTT 0.49 ms, burst bandwidth 51.684 Mbit/s, rx packet loss 100.00
%
Specifically the bit about 100% packet loss.
Ignore the bit about packet loss, that is an estimate that doesn't
work
correctly yet.
It was shortly after following by:
2013-11-28 14:51:01 tinc.dcvpn[31620]: Got REQ_KEY from rps
(2001:1b40:5000:9::2 port 55170): 15 rps rsukmhb 21 AA...
I got a REQ_KEY request 12 times in 1s from rps.
That is also normal for tinc 1.1.
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
_______________________________________________
tinc mailing list
[email protected]
http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
