On Tue, Jul 08, 2014 at 12:33:10PM -0700, Zia Syed wrote: > Thanks guys. First off, i removed the 15.0.0.0 and now I can am not able to > ping even A and B. Here is the updated network diagram. > http://cl.ly/image/0E1n0s1v043u > > On Machine A: > --------------------------- > ubuntu@homer:/etc/tinc/erix$ more hosts/esprit1 > Subnet = 192.168.1.0/32 > Address = <Public IP>
The Subnet should be 192.168.1.0/24, not /32.
> On Machine B:
> ---------------------------
> pi@raspberrypi /etc/tinc/erix $ more hosts/pi
> Subnet = 10.16.50.0/32
Here it's the same, it should be 10.16.50.0/24.
> ubuntu@homer1:/etc/tinc/erix$ route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 em1
> 172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> docker0
> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 em1
[...]
> Even though I have 'ip route add .." in both tinc-up, i dont see the route
> in 'route -n'.
Hm. When tinc is started, what happens if you run the tinc-up script by
hand like this?
INTERFACE=erix /etc/tinc/erix/tinc-up
> pi@raspberrypi /etc/tinc/erix $ ping 192.168.1.150
> PING 192.168.1.150 (192.168.1.150) 56(84) bytes of data.
> From 192.168.1.150 icmp_seq=1 Destination Net Unknown
That's tinc telling you it doesn't know about the IP address
192.168.1.150, because you added /32 instead of /24 Subnets in the host
config files.
> Could this be I am not setting the gateway for this route correctly on B?
You should not have to set a gateway. The rest of your configuration
looks fine to me, so the only problems are the Subnets and the fact that
the routes are not added by the tinc-up script.
--
Met vriendelijke groet / with kind regards,
Guus Sliepen <[email protected]>
signature.asc
Description: Digital signature
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
