I switch to lollipop 4 months ago and I never had issue. So for my opinion it is ready for daily use. Before try tinc I had my vpn implemented with openvpn, and it works great on lollipop. I switch to tinc because i prefer a mash vpn topology versus a client/server topology.
-- Andrea Squeri Inviato con Sparrow (http://www.sparrowmailapp.com/?sig) Il giorno venerdì 27 marzo 2015, alle ore 11:57, Alexander Ypema ha scritto: > I think it's more of a routing issue than anything explicitly blocking it, > they use a new 'ip rule list' and per user settings that aren't well > documented yet either, but where exactly to point I don't know. I haven't > messed with android 5 much yet, it seems not ready enough yet for daily use, > there isn't a single snapshot in the cyanogenmod repos, for example. So maybe > it's worth to just stick with Android 4 for now? > > Met vriendelijke groet / Kind regards, > Alexander Ypema > On 27 March 2015 at 08:16, Andrea Squeri <[email protected] > (mailto:[email protected])> wrote: > > I don't know.. It seems that anyone had try to made work tinc with > > lollipop. Even googoling i don't found anything about this argoument. > > Andrea Squeri > > Il 27/mar/2015 06:55 "Tatsuyuki Ishi" <[email protected] > > (mailto:[email protected])> ha scritto: > > > > > SELinux is considered as the biggest problem. > > > On Thu, Mar 26, 2015, 22:37 Andrea Squeri <[email protected] > > > (mailto:[email protected])> wrote: > > > > Yes. The problem is lollipop. I tried to install tinc on my brother's > > > > device which mount a cyano 10.1( android 4.2.2) and it works. > > > > I don't understand which is the problem with lollipop. Is there a > > > > firewall that block the packets? > > > > Andrea Squeri > > > > If you are running Lollipop / Android 5.x on your Nexus 5, then you are > > > > probably seeing the same issue I was with it. lollipop seems to change > > > > networking quite a bit in that it's using iptables / and `ip rule list` > > > > extensively for per-user settings. > > > > I think > > > > http://www.linux.org/threads/debugging-nat-prerouting-issues-iptables.7136/ > > > > is relevant if you see running in to the same issue, it's confusing > > > > quite a lot of folks. I was unable to get tinc-gui (or even tincd > > > > manually and tinkering via adb shell) to work so I've downgraded my S5 > > > > to a 4.4.2 rom. I'm not sure if coming up with a fancy tinc-up is the > > > > solution or someone with the ability to get tinc compatible with the > > > > official Android VPN API that a lot of the openvpn apps are using now. > > > > You might be able to draw some inspiration from > > > > https://github.com/offensive-security/kali-nethunter/blob/master/utils/manna/start-nat-full-lollipop.sh > > > > but I haven't tried it since I've been back on 4.4.2. > > > > > > > > On Wed, Mar 25, 2015 at 5:15 AM, Andrea Squeri <[email protected] > > > > (mailto:[email protected])> wrote: > > > > > Hi, First sorry for my bad English. > > > > > I made a vpn wtih tinc for link my home and my two office. In > > > > > Addition I want to configure my android device to link with my vpn. > > > > > The topology of the net is this: > > > > > > > > > > cubox(a linux machine in my home with vpn address 192.168.0.20) > > > > > groppalbero (a linux machine in my second office with vpn address > > > > > 192.168.0.40) > > > > > imac(a mac machine in my first office with vpn address 192.168.0.50) > > > > > nexus5(my android device with vpn address 192.168.0.80) > > > > > > > > > > I have configurate all machine and now they all works except the > > > > > android device. > > > > > On this I use “Tinc Gui” app for configure it. When I start the tinc > > > > > daemon it connect to the configured host and the tun0 interface in > > > > > created and configured, but i can ping with any hosts > > > > > and any host can ping my android device. the result of ping IS NOT a > > > > > network unavailable response. In fact it block un operation and from > > > > > the tinc gui log I can see that the packet are received by my android > > > > > device. > > > > > I suspect that can be a problem for the route but I can’t understand > > > > > which the problem is. > > > > > > > > > > For information paste the configuration from cubic and android device: > > > > > > > > > > CUBOX : > > > > > -------------------------------------------------------------------------------------------------------- > > > > > andre@cubox vpnalma]$ cat tinc.conf > > > > > # Sample tinc configuration file > > > > > > > > > > # This is a comment. > > > > > # Spaces and tabs are eliminated. > > > > > # The = sign isn't strictly necessary any longer, though you may want > > > > > # to leave it in as it improves readability :) > > > > > # Variable names are treated case insensitive. > > > > > > > > > > # The name of this tinc host. Required. > > > > > Name = cubox > > > > > > > > > > # The internet host to connect with. > > > > > # Comment these out to make yourself a listen-only connection > > > > > # You must use the name of another tinc host. > > > > > # May be used multiple times for redundance. > > > > > #ConnectTo = vaio > > > > > #ConnectTo = groppalbero > > > > > #ConnectTo = imac > > > > > #ConnectTo = servermarcy > > > > > > > > > > # The tap device tinc will use. > > > > > # Default is /dev/tap0 for ethertap or FreeBSD, > > > > > # /dev/tun0 for Solaris and OpenBSD, > > > > > # and /dev/net/tun for Linux tun/tap device. > > > > > Device = /dev/net/tun > > > > > [andre@cubox vpnalma]$ cat tinc-up > > > > > #!/bin/sh > > > > > # This file sets up the tap device. > > > > > # It gives you the freedom to do anything you want with it. > > > > > # Use the correct name for the tap device: > > > > > # The environment variable $INTERFACE is set to the right name > > > > > # on most platforms, but if it doesn't work try to set it manually. > > > > > > > > > > # Give it the right ip and netmask. Remember, the subnet of the > > > > > # tap device must be larger than that of the individual Subnets > > > > > # as defined in the host configuration file! > > > > > ifconfig $INTERFACE 192.168.0.20 netmask 255.255.255.0 > > > > > #ip link set $INTERFACE up > > > > > #ip addr add 192.168.0.20/32 (http://192.168.0.20/32) dev $INTERFACE > > > > > #ip route add 192.168.0.0/24 (http://192.168.0.0/24) dev $INTERFACE > > > > > [andre@cubox vpnalma]$ cat hosts/cubox > > > > > #iample host configuration file > > > > > # This file was generated by host beta. > > > > > > > > > > # The real IP address of this tinc host. Can be used by other tinc > > > > > hosts. > > > > > Address = 10.0.0.7 > > > > > Address = almaliberty.duckdns.org (http://almaliberty.duckdns.org) > > > > > # Portnumber for incoming connections. Default is 655. > > > > > Port = 655 > > > > > > > > > > # Subnet on the virtual private network that is local for this host. > > > > > Subnet = 192.168.0.20/32 (http://192.168.0.20/32) > > > > > ———————————————————————————————————————————————————— > > > > > The network is so configurated: > > > > > —————————————————————————————————————————————————————————————————————————————— > > > > > > > > > > [andre@cubox vpnalma]$ ifconfig > > > > > eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > > > > > inet 10.0.0.7 netmask 255.255.255.0 broadcast 10.0.0.255 > > > > > inet6 fe80::d263:b4ff:fe00:6a6b prefixlen 64 scopeid > > > > > 0x20<link> > > > > > ether d0:63:b4:00:6a:6b txqueuelen 1000 (Ethernet) > > > > > RX packets 63975281 bytes 142504956 (135.9 MiB) > > > > > RX errors 0 dropped 2 overruns 0 frame 0 > > > > > TX packets 35826176 bytes 2648965717 (2.4 GiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > > > > > inet 127.0.0.1 netmask 255.0.0.0 > > > > > inet6 ::1 prefixlen 128 scopeid 0x10<host> > > > > > loop txqueuelen 0 (Local Loopback) > > > > > RX packets 167609 bytes 76370891 (72.8 MiB) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 167609 bytes 76370891 (72.8 MiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > vpnalma: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 > > > > > inet 192.168.0.20 netmask 255.255.255.0 destination > > > > > 192.168.0.20 > > > > > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > > > > > txqueuelen 500 (UNSPEC) > > > > > RX packets 8876 bytes 1765584 (1.6 MiB) > > > > > RX errors 0 dropped 0 overruns 0 frame 0 > > > > > TX packets 5939 bytes 2394177 (2.2 MiB) > > > > > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > > > > > > > > [andre@cubox vpnalma]$ route > > > > > Kernel IP routing table > > > > > Destination Gateway Genmask Flags Metric Ref > > > > > Use Iface > > > > > default router.asus.com (http://router.asus.com) 0.0.0.0 > > > > > UG 1024 0 0 eth0 > > > > > 10.0.0.0 * 255.255.255.0 U 0 0 > > > > > 0 eth0 > > > > > router.asus.com (http://router.asus.com) * > > > > > 255.255.255.255 UH 1024 0 0 eth0 > > > > > 192.168.0.0 * 255.255.255.0 U 0 0 > > > > > 0 vpnalma > > > > > [andre@cubox vpnalma]$ > > > > > > > > > > > > > > > —————————————————————————————————————————————————————————————————— > > > > > > > > > > ON THE ANDROIDE DEVICE SIDE I HAVE THIS CONFG: > > > > > > > > > > > > > > > u0_a167@hammerhead:/ $ su > > > > > root@hammerhead:/ # cd sdcard/tinc/vpnalma > > > > > at tinc.conf < > > > > > # Sample tinc configuration file > > > > > # This is a comment. > > > > > # Spaces and tabs are eliminated. > > > > > # The = sign isn't strictly necessary any longer, though you may want > > > > > # to leave it in as it improves readability :) > > > > > # Variable names are treated case insensitive. > > > > > # The name of this tinc host. Required. > > > > > Name = nexus5 > > > > > # The internet host to connect with. > > > > > # Comment these out to make yourself a listen-only connection > > > > > # You must use the name of another tinc host. > > > > > # May be used multiple times for redundance. > > > > > ConnectTo = cubox > > > > > ConnectTo = groppalbero > > > > > ConnectTo = imac > > > > > # The tap device tinc will use. > > > > > # Default is /dev/tap0 for ethertap or FreeBSD, > > > > > # /dev/tun0 for Solaris and OpenBSD, > > > > > # and /dev/net/tun for Linux tun/tap device. > > > > > #Mode = switch > > > > > Device = /dev/tun > > > > > #DeviceType = tap > > > > > #Interface = tap0 > > > > > #echo 1 > /proc/sys/net/ipv4/conf/$INTERFACE/rp_filter > > > > > ScriptsInterpreter = /system/bin/sh > > > > > root@hammerhead:/sdcard/tinc/vpnalma # cat tinc-up > > > > > #!/bin/sh > > > > > # This file sets up the tap device. > > > > > # It gives you the freedom to do anything you want with it. > > > > > # Use the correct name for the tap device: > > > > > # The environment variable $INTERFACE is set to the right name > > > > > # on most platforms, but if it doesn't work try to set it manually. > > > > > # Give it the right ip and netmask. Remember, the subnet of the > > > > > # tap device must be larger than that of the individual Subnets > > > > > # as defined in the host configuration file! > > > > > ifconfig $INTERFACE 192.168.0.80 netmask 255.255.255.0 > > > > > #echo 1 > /proc/sys/net/ipv4/conf/$INTERFACE/rp_filter > > > > > #ip link set $INTERFACE up > > > > > #ip addr add 192.168.0.80/24 (http://192.168.0.80/24) dev $INTERFACE > > > > > #ip route add 192.168.0.0/24 (http://192.168.0.0/24) dev $INTERFACE > > > > > root@hammerhead:/sdcard/tinc/vpnalma # hosts/nexus5 > > > > > sh: hosts/nexus5: can't execute: Permission denied > > > > > at hosts/nexus5 < > > > > > # Sample host configuration file > > > > > # The real IP address of this tinc host. Can be used by other tinc > > > > > hosts. > > > > > # Portnumber for incoming connections. Default is 655. > > > > > #Port = 655 > > > > > # Subnet on the virtual private network that is local for this host. > > > > > Subnet = 192.168.0.80/32 (http://192.168.0.80/32) > > > > > -----BEGIN RSA PUBLIC KEY----- > > > > > > > > > > -----END RSA PUBLIC KEY----- > > > > > root@hammerhead:/sdcard/tinc/vpnalma # ip addr > > > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > > > > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > > > > inet 127.0.0.1/8 (http://127.0.0.1/8) scope host lo > > > > > inet6 ::1/128 scope host > > > > > valid_lft forever preferred_lft forever > > > > > 2: rmnet0: <UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen > > > > > 1000 > > > > > link/[530] > > > > > inet 10.183.70.124/29 (http://10.183.70.124/29) scope global > > > > > rmnet0 > > > > > inet6 fe80::7561:c093:ea26:5781/64 scope link > > > > > valid_lft forever preferred_lft forever > > > > > 3: rmnet1: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 4: rmnet2: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 5: rmnet3: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 6: rmnet4: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 7: rmnet5: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 8: rmnet6: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 9: rmnet7: <> mtu 2000 qdisc noop state DOWN qlen 1000 > > > > > link/[530] > > > > > 10: rev_rmnet0: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether a2:f5:64:5f:9d:05 brd ff:ff:ff:ff:ff:ff > > > > > 11: rev_rmnet1: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether ea:f8:93:71:83:a1 brd ff:ff:ff:ff:ff:ff > > > > > 12: rev_rmnet2: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 2a:84:3a:f5:3b:f0 brd ff:ff:ff:ff:ff:ff > > > > > 13: rev_rmnet3: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 4a:d5:f8:77:cb:80 brd ff:ff:ff:ff:ff:ff > > > > > 14: rev_rmnet4: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 16:db:e7:e3:f4:39 brd ff:ff:ff:ff:ff:ff > > > > > 15: rev_rmnet5: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 46:3a:94:70:f0:5f brd ff:ff:ff:ff:ff:ff > > > > > 16: rev_rmnet6: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 62:2c:a9:03:e9:4d brd ff:ff:ff:ff:ff:ff > > > > > 17: rev_rmnet7: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether f6:8e:08:a1:aa:10 brd ff:ff:ff:ff:ff:ff > > > > > 18: rev_rmnet8: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN > > > > > qlen 1000 > > > > > link/ether 72:92:60:5c:e6:7c brd ff:ff:ff:ff:ff:ff > > > > > 19: sit0: <NOARP> mtu 1480 qdisc noop state DOWN > > > > > link/sit 0.0.0.0 brd 0.0.0.0 > > > > > 20: p2p0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN > > > > > qlen 1000 > > > > > link/ether 8e:3a:e3:18:bb:55 brd ff:ff:ff:ff:ff:ff > > > > > 21: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN > > > > > qlen 1000 > > > > > link/ether 8c:3a:e3:18:bb:55 brd ff:ff:ff:ff:ff:ff > > > > > 23: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc > > > > > pfifo_fast state UNKNOWN qlen 500 > > > > > link/none > > > > > inet 192.168.0.80/24 (http://192.168.0.80/24) scope global tun0 > > > > > > > > > > root@hammerhead:/sdcard/tinc/vpnalma # ip route > > > > > 10.183.70.120/29 (http://10.183.70.120/29) dev rmnet0 proto kernel > > > > > scope link src 10.183.70.124 > > > > > 10.206.56.132 via 10.183.70.125 dev rmnet0 src 10.183.70.124 > > > > > 10.207.43.46 via 10.183.70.125 dev rmnet0 src 10.183.70.124 > > > > > 192.168.0.0/24 (http://192.168.0.0/24) dev tun0 proto kernel scope > > > > > link src 192.168.0.80 > > > > > > > > > > root@hammerhead:/sdcard/tinc/vpnalma # ping 192.168.0.20 > > > > > PING 192.168.0.20 (192.168.0.20) 56(84) bytes of data. > > > > > ^C > > > > > --- 192.168.0.20 ping statistics --- > > > > > 10 packets transmitted, 0 received, 100% packet loss, time 9003ms > > > > > 1|root@hammerhead:/sdcard/tinc/vpnalma # > > > > > ———————————————————————————————————————————————————————————————————————————————— > > > > > From the tinc gui log that I can’t copy and paste , I see that the > > > > > device in connected to cubic but i can’t ping with it. > > > > > > > > > > -- > > > > > Andrea Squeri > > > > > Inviato con Sparrow (http://www.sparrowmailapp.com/?sig) > > > > > > > > > > > > > > > _______________________________________________ > > > > > tinc mailing list > > > > > [email protected] (mailto:[email protected]) > > > > > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > > > > > > > > > > > > > > > > > _______________________________________________ > > > > tinc mailing list > > > > [email protected] (mailto:[email protected]) > > > > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > > > > > > > > _______________________________________________ > > > > tinc mailing list > > > > [email protected] (mailto:[email protected]) > > > > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > > > > > > _______________________________________________ > > > tinc mailing list > > > [email protected] (mailto:[email protected]) > > > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > > > > > > > _______________________________________________ > > tinc mailing list > > [email protected] (mailto:[email protected]) > > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > > > > _______________________________________________ > tinc mailing list > [email protected] (mailto:[email protected]) > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
