Yup, it worked. Can't believe I missed that. Feel stupid now. Thanks
On Thu, 21 May 2015 at 18:50 Alexander Ried <[email protected]> wrote: > You have a typo in your routes: > > fd80:2015:2105:adcd::/6 > abcd vs. adcd > > On 21 May 2015, at 19:35, Martin <[email protected]> wrote: > > I have 2 nodes nodeA and nodeB > I'm using tinc 1.1pre11 > > -- nodeA(fd80:2015:2105:abcd::1) : > > $ ip -6 route > fd80:2015:2105:abcd::1 dev tun0 proto kernel metric 256 > fd80:2015:2105:adcd::/64 dev tun0 metric 1024 > fe80::/64 dev eth0 proto kernel metric 256 > > $ ping6 fd80:2015:2105:abcd::1 > PING fd80:2015:2105:abcd::1(fd80:2015:2105:abcd::1) 56 data bytes > 64 bytes from fd80:2015:2105:abcd::1: icmp_seq=1 ttl=64 time=0.020 ms > > $ ping6 fd80:2015:2105:abcd::2 > connect: Network is unreachable > > -- nodeB(fd80:2015:2105:abcd::2): > > $ ip -6 route > fd80:2015:2105:abcd::2 dev tun0 proto kernel metric 256 > fd80:2015:2105:adcd::/64 dev tun0 metric 1024 > fe80::/64 dev eth0 proto kernel metric 25 > > $ ping6 fd80:2015:2105:abcd::2 > PING fd80:2015:2105:abcd::2(fd80:2015:2105:abcd::2) 56 data bytes > 64 bytes from fd80:2015:2105:abcd::2: icmp_seq=1 ttl=64 time=0.019 ms > > $ ping6 fd80:2015:2105:abcd::1 > connect: Network is unreachable > > > I can see in the debug output that the tinc daemons on each node is > talking to each other. > I suspect kernel having some internal settings as I don't see any debug > message when I do a ping6 to the other node. > If I change the ip -6 route on both nodes to /48 it works fine. > > On Thu, 21 May 2015 at 16:19 Guus Sliepen <[email protected]> wrote: > >> On Thu, May 21, 2015 at 02:26:54PM +0000, Martin wrote: >> >> > I've been trying out IPv6 networking with tinc and noticed that it will >> not >> > route smaller segments than /48 >> > If I try to run ip -6 route add aaaa:bbbb:cccc:dddd::/64 dev tun0 I get >> > network unreachable >> > However if I run ip -6 route add aaaa:bbbb:cccc::/48 dev tun0 it works >> fine >> > >> > Is this is a limitation in tinc or the kernel network stack itself? >> >> You should be able to add any route with any prefix just fine. But can >> you show us the output of "ip -6 route show" and the exact command that >> you tried that fails? >> >> -- >> Met vriendelijke groet / with kind regards, >> Guus Sliepen <[email protected]> >> _______________________________________________ >> tinc mailing list >> [email protected] >> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc >> > _______________________________________________ > tinc mailing list > [email protected] > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc > >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
