Hello,
Please tell me if it's possible to use tinc together with OSPF (instead of static routes in LAN). By OSPF I mean Quagga's GNU/Linux daemon. Namely, I have a group of LANs (private 192.168.x.0/24 each). Each LAN has a GNU/Linux default gateway, 192.168.x.1, that also connects to the Internet via a public IP address (does NAT and firewall for the LAN "behind" it). tinc daemon runs on each default gateway, connecting all LANs in a mesh. Today, on each default gateway, the /etc/tinc/NETWORK/tinc-up looks like: ifconfig $INTERFACE 192.168.x.1 netmask 255.255.0.0 ip route replace 10.0.0.0/8 dev $INTERFACE ip route replace 172.16.0.0/12 dev $INTERFACE so all private addreses are routed via the mesh. Now other gateways/routers (non-tinc, non-defaut, with private adddreses only) are installed in each LAN, connecting them via „backup” links (purely private Ethernets). What I need is to start an interior dynamic routing daemon (OSPF?) on all routers (tinc or non-tinc) and share the routing information between them all (*including* those over tinc tunnels). The final goal is that if some random router/gateway fails, the network reconfigures itself without manual intervention (without the need to modify static routes on non-tinc routers). Could you please point me to some good documentation / examples for accomplishing this (if technically possible) ? How do I "inject" tinc routes in OSPF and vice-versa? Should the tinc virtual NETWORK interface participate in a Quaga/OSPF process, together with the other physical Ethernet private interfaces? How should /etc/tinc/NETWORK/tinc-up look like in such cases? Thanks a lot, Răzvan
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
