Hello, I have two servers (A and B) in separate locations. Both are connected together via two tinc switches to provide two subnets on both servers. This works pretty good. I can start my VMs on any server connected to one of those bridges without changing any routes. The subnets hosted on both servers (each in a bridge) are 172.16.10.0/24 (mainly on A) and 172.16.11.0/24 (mainly on B)
Now I want to connect to those servers from a third location (C) via tinc router. The idea was to connect to both and have a failover route if one connection fails. So I added on A: Subnet = 172.16.10.0/24#10 Subnet = 172.16.11.0/24#20 And on B: Subnet = 172.16.11.0/24#10 Subnet = 172.16.10.0/24#20 Basically it seems to route all correct. But I got packet loss when both tinc routers on A and B are running. If I shutdown the tinc router on B, it works. >From C I try to ping B and got about 20% packet loss. A tcpdump shows that tinc packets are going to B and back. I can see the port 655 packet arriving at C, but the decrypted ping-reply does not appear. What is happening to that packet? Is the tinc on C dropping it? Do I miss a rule or something. Two servers run tinc 1.0.24, the other 1.0.26. Thanks. Armin _______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
