Hi Graham Regarding the tun lib , see mine.
root@OpenWrt:~# /lib/modules/3.3.8/tun.ko And like i mention to Maxim , i have tinc running in a Linux Debian environment with 4 nodes successfully. I am experimenting now in openwrt due to the "light weight" environment. Regards Yazeed Fataar <[email protected]> On Tue, Jan 19, 2016 at 8:27 PM, Yazeed Fataar <[email protected]> wrote: > Hi Graham > > Can you perhaps share with me the mr-mips metarouter image you are using? > > Regards > Yazeed Fataar > <[email protected]> > > On Tue, Jan 19, 2016 at 8:01 PM, Graham Cobb <[email protected]> wrote: > >> On 19/01/16 03:57, Yazeed Fataar wrote: >> > Hi Marek >> > >> > I managed to setup everything in openwrt. However I am getting errors >> > when trying to run tinc daemon. Below is my debug output. Please help.. >> > How do I fix tunnel interface error? >> > >> > root@OpenWrt:/etc/tinc/vpn# tincd -n vpn -D -d3 >> > >> > tincd 1.0.21 (Mar 9 2014 18:26:59) starting, debug level 3 >> > >> > /dev/net/tun is a Linux ethertap device >> >> On my OpenWrt system, the corresponding log entry says: >> >> /dev/net/tun is a Linux tun/tap device (tun mode) >> >> I don't know if that is a real problem. And I don't know how the tun >> device gets created -- I don't remember having to do anything special >> (but it was a long time ago when I set it up). >> >> However, I do start tinc using "/etc/init.d/tinc start", not by running >> tincd directly. >> >> > Executing script tinc-up >> > >> > ifconfig: SIOCGIFFLAGS: No such device >> > >> > ifconfig: SIOCSIFADDR: No such device >> > >> > Script tinc-up exited with non-zero status 1 >> >> That doesn't look good! >> >> My /etc/tinc/NETWORK/tinc-up file contains: >> >> #!/bin/sh >> ifconfig $INTERFACE 1.2.3.4 netmask 255.255.0.0 >> /etc/init.d/firewall reload >> >> (with the real IP address for this node of the VPN instead of 1.2.3.4, >> of course). >> >> I do remember some work being needed to get the firewall set up >> correctly. But you aren't getting that far. >> >> I would support Maxim's suggestion: make sure you have a simple tinc >> network working on ordinary Linux systems first, to make sure you know >> how the keys and addressing work. >> >> Graham >> _______________________________________________ >> tinc mailing list >> [email protected] >> http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc >> > >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
