On 05/11/2017 02:01 PM, Etienne Dechamps wrote:
These two networks can be the same, i.e. the VPN can be an extension of your
local network, sharing the same subnet. That's one
the many ways things can be set up. The same result can be achieved through
other ways (e.g. Ethernet-level bridging). This does
not contradict my earlier statement: a subnet can be *both* inside *and*
outside the VPN, depending on the scenario.
The Subnet configuration option indicates the subnets that you want tinc to
route towards your node. tinc doesn't care whether
these subnets are also part of a physical network or not; it just uses it to
route packets inside the VPN, once they leave the VPN
tinc's job is done. Technically you can put anything you want in your Subnet
options; it all depends on what behavior you want to
achieve in the end
I'm a noob, so my goal is simplicity. What examples, howto's, tutorials do you
recommend?
Besides simplicity, my goal is a virtual private network between 3 VPS
datacenters that may not have private networks
as a service they provide, but they do provide IPv4 addresses.
_______________________________________________
tinc mailing list
[email protected]
https://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
