I got some success with my question of disassembly or recycling. Maybe someone have need for my solution, too.
Comments, corrections are welcome. Cheers Udo +++ Howto for Version 4.03 +++ - First I create my Products with BOMs. F.ex. Product: Standard Egg Product: Case of easter eggs contains BOM 10 x Product Standard Egg - After this I fill the stock with some 'case of easter eggs', and some 'standard Eggs'. - To re-pack or disassemble one 'case of easter eggs', I created a 'Production Order' for one 'case of easter eggs' and fill in the 'Product Qty' of -1 (minus one) - Click on 'Compute Data' - Go to Tab 'Planned Materials' - Set the 'Product Qty' to -1 (minus one), too Attention: If you click on 'Compute Data' again, you have to correct the 'Product Qty' in Tab 'Planned Materials' again. - Click on 'Confirm Production' (Tab General) - Click on 'Force Reservation' - Click on 'Start Production' - Click on 'Production done' Ready. As result you get the stock for 'Case of easter eggs' minus one and the stock for 'Standard egg' plus ten. Think of disassemble like a reverted production process. +++ Caveats +++ - Of course my solution is not this mighty, because you have to walk throu a complete production process just for disassemble a case with products inside. If you have to repack 100 boxes per day, you know what you have done ;-) - The production process generates some 'Procurement' noise, but this may happen because of misunderstanding the principles of TinyERP. _______________________________________________ Tinyerp-users mailing list http://tiny.be/mailman/listinfo/tinyerp-users
