Hi all
I removed the previous installation. Now I have installed the packages
from http://www.tinyos.net/dist-1.1.0/tools/linux/ with tinyos-1.1.0 .
which are
avarice-2.0.20030825cvs-1.i386.rpm
avr-binutils-2.13.2.1-1.i386.rpm
avr-gcc-3.3tinyos-1.i386.rpm
avr-insight-pre6.0cvs.tinyos-1.3.i386.rpm 11-Sep-2003
avr-libc-20030512cvs-1.i386.rpm
graphviz-1.10-1.i386.rpm
Since nesc-1.1.1 is no more available I had installed nesc-1.1.2b.
Therefore I had to upgrade to avr-binutils 2.15.
This gives me the same error that Rene Desgagnes had before.
[EMAIL PROTECTED] Blink]# make mica
compiling Blink to a mica binary
ncc -o build/mica/main.exe -Os -board=micasb -target=mica -Wall -Wshadow
-DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -finline-limit=100000
-fnesc-cfile=build/mica/app.c Blink.nc -lm
as: unrecognized option `-mmcu=atmega103'
make: *** [build/mica/main.exe] Error 1
As suggested
by Kristin I did toscheck which tells me the following
avr-as:
/usr/bin/avr-as
GNU assembler 2.15
--> WARNING: The avr-as version found by toscheck is not 2.13.2.1 Please
update your avr-as version by updating your avr-binutils package.
Looks like all this will be solved if I can get nesc-1.1.1. Is
there any other work around?
**************************************************************************
On 7/18/05, Rene Desgagnes <rene.desgagnes at gmail.com> wrote:
> Hi everyone,
>
> I have read almost all help messages but I didn't
> solve my problem. I followed all steps to install tinyos on linux.
> The first problem I encountered was when I was compiling "Blink" with
> "make mica2", I received assembler error messages. However, when I
> was compiling with "make pc", everything is working properly. So, I
> have upgraded my binutils package from 2.13 to 2.15 because one of
> tinyos-help mailinglist topic said that this will solve the problem.
> No, I'm having a different error message when I compile with "make
> mica2" :
> [rene at dhcp-32-214 Blink]$ make mica2
> mkdir -p build/mica2
> compiling Blink to a mica2 binary
> ncc -o build/mica2/main.exe -Os -finline-limit=100000 -Wall -Wshadow
> -DDEF_TOS_AM_GROUP=0x7d -Wnesc-all -target=mica2
> -fnesc-cfile=build/mica2/app.c -board=micasb
> -DIDENT_PROGRAM_NAME="Blink"
> -DIDENT_PROGRAM_NAME_BYTES="66,108,105,110,107,0"
> -DIDENT_USER_ID="rene" -DIDENT_USER_ID_BYTES="114,101,110,101,0"
> -DIDENT_HOSTNAME="dhcp-32-214.gel"
>
-DIDENT_HOSTNAME_BYTES="100,104,99,112,45,51,50,45,50,49,52,46,103,101,108,0"
> -DIDENT_USER_HASH=0xcadbc733L -DIDENT_UNIX_TIME=0x42dbc426LBlink.nc
> -lm
> as: unrecognized option `-mmcu=atmega128'
> make: *** [exe0] Error 1
>
> I went again on tinyos-help mailinglist archive to find out what to do
> but no one seems to have solved this problem except some who tell to
> recompile nesc. I reinstall the nesC rpm but I got this message
> again.
>
> What must I do ?
>
> Thanks,
>
> Rene Desgagnes
>
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help at Millennium.Berkeley.EDU
>
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
Shweta
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
