I use the MIB510 so it was just a guess.
you can turn on uisp tracing with -v=4
maybe something will turn up there.
MS
Marc Talampas wrote:
Michael,
Were you also using the ATAVRISP to program your motes? I tried using
/dev/ttyS0 as you suggested but I get the same results. Thanks for the
suggestion though.
Is there anything else I can try?
Thanks.
Marc
On 2/5/06, Michael Schippling <[EMAIL PROTECTED]> wrote:
You might be the victim of the "cygwin update" problem I had.
Try using /dev/ttyS0 and see if it helps.
MS
Marc Talampas wrote:
Thanks Josh, but I'm sure that I am using the correct COM port. As I
said, I was able to use AVR Studio to read the MICA2's flash as well
as the signature bytes of its onboard ATmega128. I used COM1 for both
the AVR Studio and uisp. Using COM1 with AVR Studio (in Windows)
works, while uisp (in cygwin) doesn't.
Marc
On 2/5/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Marc,
I am not sure about your programming board, I am using the MIB510 (Serial).
But i have gotten that error before, when I was trying to use a USB to Serial
converter, and the issue was the COM port. So make sure that you are using the
correct COM port.
Josh
Quoting Marc Talampas <[EMAIL PROTECTED]>:
Hi all,
I've been trying to program MICA2 motes using atmel's ATAVRISP
programmer. However i keep getting a "Programmer not responding"
error. Here's an example of what i did:
$ make mica2 reinstall,3 avrisp,COM1
set-mote-id build/mica2/main.srec build/mica2/main.srec.out 3
installing mica2 binary using avrisp
uisp -dprog=stk500 -dserial=COM1 -dpart=ATmega128 --wr_fuse_e=ff --erase
--uplo
ad if=build/mica2/main.srec.out
Programmer is not responding.
make: *** [program] Error 2
I have verified that the ATAVRISP is working, as i have used AVR
Studio to read the contents of the MICA2's flash to a file.
Has anybody had the same problem as I'm having?
Thank you very much in advance for your help.
Regards,
Marc T.
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
