|
Hi Jeong Ki,
My name is Kevin Lee from NESL lab at UCLA.
I ran into the same problem and I was wondering
have you fixed this problem?
-------------------------------------------------------------------------------------------------------
Dear everyone.
I have some problem on my JTAG. I'm using the AVR-JTAG-L from OLIMEX with MIB510 and MICA2 and TOS1.1.7. Actually, I've just read the tutorial on the TOS site for AVRICE. Do I need to do something different work for this JTAG from olimex? Please, give me an advice about this. I would appreciate your help!! Thanks.. Best regards, Jeong Ki MIN When I try to do like below, I have a communication error. $ ice-gdb build/mica2/main.exe AVaRICE version 2.0.20030825cvs, Aug 25 2003 20:53:25 JTAG ICE communication failed: Inappropriate ioctl for device GNU gdb cvs-pre6.0-tinyos Copyright 2003 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i686-pc-cygwin --target=avr"... /usr/local/share/avarice/gdb-avarice-script:26: Error in sourced command file: localhost:6423: Connection refused. Fuse information like below $ uisp -dprog=mib510 -dserial=COM1 -dpart=ATmega128 --rd_fuses Firmware Version: 2.1 Atmel AVR ATmega128 is found. Fuse Low Byte = 0xff Fuse High Byte = 0x19 Fuse Extended Byte = 0xff Calibration Byte = 0x00 -- Read Only Lock Bits = 0xff BLB12 -> 1 BLB11 -> 1 BLB02 -> 1 BLB01 -> 1 LB2 -> 1 LB1 -> 1 |
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
