Swati
which programming board r u using mib500 or mib510, and what version of tiny os have u installed
if it is mib510 then the problem is as highlighted in green
Rahul Sawant
On 2/16/06, Swati Gupta <[EMAIL PROTECTED]> wrote:
Hello,This is Swati from DA-IICT,i am working on the Mica motes in the Crossbow kit and am facing an error in uploading the program in the moteI would like to know how to reset the Fuse High Byte which is coming as set to 0xd8i am also getting a flash error like thisuisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff --erase
Atmel AVR ATmega128 is found.
Erasing device ...
Reinitializing device
Atmel AVR ATmega128 is found.
pulse
pulse
Fuse High Byte set to 0xd8
Fuse Extended Byte set to 0xff
sleep 1
uisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff --
upload if=build/mica2/main.srec.out
Atmel AVR ATmega128 is found.
Uploading: flash
pulse
Fuse High Byte set to 0xd8
Fuse Extended Byte set to 0xff
sleep 1
uisp -dprog=dapa --wr_fuse_h=0xd8 -dpart=ATmega128 --wr_fuse_e=ff --
verify if=build/mica2/main.srec.out
Atmel AVR ATmega128 is found.
Verifying: flash
flash error at address 0x0: file=0x0c, mem=0xff
flash error at address 0x1: file=0x94, mem=0xff
flash error at address 0x2: file=0xb5, mem=0xff
flash error at address 0x3: file=0x01, mem=0xff
flash error at address 0x4: file=0x0c, mem=0xff
flash error at address 0x5: file=0x94, mem=0xff
flash error at address 0x6: file=0xd2, mem=0xff
flash error at address 0x7: file=0x01, mem=0xff
Can you please guide me why am i getting the highlighted error?It would be of tremendous help to meThankyou
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
