Another quick question on the GND port: I've integrated a sensor using TelosADC which compleates a circuit when pressed(like a switch). It uses the Vcc port on the tmote as the input. At some stage in its operation, it needs to be grounded. When the button is depressed, it becomes live (Vcc passes through it and can be observed using an oscilloscope). This needs to be grounded with another mote so that the button press won't be detected by the mote it is actually connected to(if that makes sense)!
However, when I try to do this, the mote still registers the button press. i don't necessarily need all the voltage to be "pulled" to ground but I need a enough of a voltage drop for the mote to transmit a different value(it currently transmits FF F0 when the button is pressed). Does anyone know why this is and if so do you have any suggestions on how I can fix it? Thanks again Colin _______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
