Start with some simpler tests of the radio connectivity.
MicaHWVerify and CntToLedsAndRfm should both (dis)prove that
your radios are talking to each other. If you are using mica2
make sure you are working in the contrib/xbow tree, otherwise
the radio xmit strength is set very low.
MS
patrick kuckertz wrote:
Dear all,
I am using mica2 and have a problem with Continuousdata.
In dataready I want to post a task sendmessage(), if a threshold is reached.
But I do not want to stop recording data....
I use a flag to post this message only once.
However, if I use uart I receive all messages, but if I use Tosbase and
send the packets to bcast I do not receive the messages.
I have added "TOSH_CLR_YELLOW_LED_PIN();" in check.c , to see if the
task queue is full, but I do not get a yellow light.
Does anybody know what might get wrong?
If I return FAIL in the dataready event and send the packet after that
it works. But I want to keep on getting samples.
Best Regards,
Patrick
------------------------------------------------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail
<http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=39174/*http://photomail.mail.yahoo.com>
makes sharing a breeze.
------------------------------------------------------------------------
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
[email protected]
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
