Where exactly can I find this interface ? under chips/cc2420 ? or under micaz ? I just updated the CVS so not sure if I got your changes.
Thanks,
Avinash
On 3/23/06, Jonathan Hui <[EMAIL PROTECTED]> wrote:
I've updated the tinyos-2.x cc2420 stack to support changing of
transmission power. The 2.x method is different from 1.x in that
transmission power is specified on a per-packet basis using the
CC2420Packet interface.
Note: if you are on anonymous access with sourceforge, it may take up
to 24 hours to propagate the changes.
--
Jonathan W. Hui
[EMAIL PROTECTED]
http://www.cs.berkeley.edu/~jwhui/
On 3/23/06, Avinash Sridharan <[EMAIL PROTECTED]> wrote:
> Hi All,
> I wanted to set the power of my radio dynamically (at runtime). I figured
> out that the CC2420Config.nc provides such an interface to set the
> transmission power and it is implemented in CC2420ControlP.nc. However I am
> not able to find any of the generic interfaces (that hide the hardware
> specifics) in tinyOS-2.x that are are exposing the full functionality of
> CC2420Config.nc (that is the ability to set the tx power of the radios) to
> applications.
>
> Do I need to access the CC2420Control component directly to perform the
> above operation ?
>
> Thanks,
> Avinash
>
> --
> Phd Dept. of Electrical Engineering
> University of Southern California
> http://www-scf.usc.edu/~asridhar
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
>
--
Phd Dept. of Electrical Engineering
University of Southern California
http://www-scf.usc.edu/~asridhar
_______________________________________________ Tinyos-help mailing list [email protected] https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
